Oomatshini beHawk Multi Rip Saw
| Amandla enjini aphambili: | 18.5KW |
| Injini yokutyisa: | 1.5KW |
| Esona santya siphezulu: | 3200(r/min) |
| Inkcazo yencakuba yesarha: | 300mmX3.2mmX2.2mmX(80-100)mm |
| Ukubona isantya: | Ukulungiswa 15~35(m/min) |
| Ukuchaneka kweshiti: | < 0.2mm/m |
| Saw blade idayamitha: | Ф80~Ф100mm |
| Ubukhulu beSawing: | 3-25mm |
| Imilinganiselo: | Ubude 2.2X Ububanzi 1.9X Ubude 1.2 (m) |
| Ubunzima: | 2.6(T) |
Umatshini uqulunqwe ngumzimba ovalelwe ngokupheleleyo kunye neqonga lokutyisa nokukhupha.I-saw blade ifakwe ngokuthe ngqo kwi-shaft ephambili ye-motor, indlela yokutya iqhutywa yi-motor eguquguqukayo eguquguqukayo, kwaye i-roller drive roller inokulungelelaniswa kunye, umatshini wonke unesakhiwo esihlangeneyo kunye noyilo oluphambili.
Iimpawu eziphambili:
I-1, iteknoloji ephezulu, ukusetyenziswa kwe-software ye-software ye-THREE-DIMENSIONAL, isikhungo esikhulu sokucubungula i-gantry, kwinqanaba eliphambili lasekhaya;
I-2, ukuchaneka okuphezulu, ukuchaneka komthungo kulungile, kunokwanelisa iimfuno zomgangatho wokulinganisa womthi, umgangatho we-laminate jikelele kunye nomgangatho we-SPC we-sawing unokufikelela ngokuthe tye okulungileyo, ukugcinwa kwezinto eziphathekayo;
I-3, ukukhuselwa kwendalo, umatshini wonke uvalwe ngokupheleleyo, uthuli oluveliswayo lukhutshwa ngokuthe ngqo ngenkqubo yokukhupha uthuli, indawo yokusebenza icocekile.
Imilinganiselo yobugcisa:
1. Ubungakanani bomgangatho:
- ububanzi obukhulu: 1300 mm.
- ubukhulu: 6-20 mm.
2. Inkcazo yesixhobo esisisiseko:
- Uchaneko oluphezulu lwe-chrome ephothiweyo yokusonta kunye nedayamitha yokusonta eyi-80 mm kunye nebhondi ephindwe kabini;Idayamitha yokusonta yi-100 mm xa kusetyenziswa umkhono we-hydraulic shaft.
-Injini yokuphotha 18.5 kw.
- i-roller ephezulu ye-roller yi-roller ye-rubber, kwaye i-roller ephantsi i-hard chromium iron roller.
- isixhobo sokususa uthuli lwangaphakathi.
- i-saw blade cut, i-anti - ukubetha kunye nesixhobo sokuqinisa.
- isixhobo sokutshayela esiphakathi.
3. Isantya somgca wemveliso:
-25 -35 m / min.
I-Hawk High Performance Auto Cutting Line idibene ne-HKJ900 Multi Rip Saw, i-Vacuum Steering Machine kunye ne-HKC6 Cross Cut saw.I-Hawk High Performance Auto Cutting Line ifanelekile kwi-speed-speed, i-slicing echanekileyo kunye nokulungelelaniswa kwamacwecwe amakhulu, kwaye ifaneleke ngakumbi kwizinto ezinobunzima obuncinci njenge-dryback SPC umgangatho kunye nomgangatho we-LVT endaweni yomshini we-punch.I-saw blade ye-HKJ900 ephumayo kunye nesixhobo sokulungelelanisa esizimeleyo siqonda ukutshintshwa ngokukhawuleza kwe-saw blade kunye nokuguqulwa ngokukhawuleza kwenkcazo yomgangatho.Imowudi yokudibanisa imveliso ngokuzenzekelayo inokuqonda isantya sokusika seemitha ezingama-40 ngomzuzu kwaye sinciphise kakhulu iindleko zokuvelisa
IHawk High Performance Auto Cutting Line:
1. Ukusebenza okuphezulu, isantya si-15-18 pcs / min.
2.Ukuchaneka okuphezulu, ukuchaneka kwephaneli elawulwa ngaphakathi kwe-0.05-0.10mm / m.
3.Isakhiwo esahlukileyo se-saw blade kunye ne-motor, ngoko inokutshintsha ngokukhawuleza nangokulula imilinganiselo eyahlukeneyo yemveliso.
I-4.Touch screen sets, i-servo motor ilawula ukuhamba kwe-saw blade, ukusebenza okulula, ukuchaneka okuphezulu.
I-5.Ukusika i-mold ayifuni, inokugcina iindleko kunye nexesha lokumisa.
6.Sika iimveliso ezingakwazi ukuqhubela phambili i-punch press (Ibandakanya iimveliso ezithile ezibangelwa ubukhulu, ubude kunye nobunzima).
Inkqubo ye-7.Batch, indawo encinci yomsebenzi.
8.Realize automation yemveliso eqhubekayo, ukunciphisa inani lengqesho.
| HKJ900 | HKC6 | |
| Amandla e-Spindle motor | 5.5kw | 4.0kw |
| Saw blade motor amandla | 8*5.0kw | 3*5.0kw |
| Saw blade motor isantya | 2500 - 5200rpm (Ukuguqulwa rhoqo) | 2500 - 5200rpm (Ukuguqulwa rhoqo) |
| Imowudi yokulungelelanisa isithuba se-blade | Uhlengahlengiso lwedijithali kwisikrini sokuchukumisa | Uhlengahlengiso lwedijithali kwisikrini sokuchukumisa |
| Ukuchaneka kokulungelelaniswa kwezithuba ze-blade | ±0.015mm | ±0.015mm |
| Saw blade ubukhulu | 300 - 320mm | 300 - 320mm |
| Idayamitha yomngxuma ngaphakathi isarha blade | 140mm | 140mm |
| Ubukhulu becala lesarha | 1.8 - 3mm | 1.8 - 3mm |
| Ukulungelelanisa uluhlu lokuphakanyiswa kwe-saw blade | -10 - 70mm (Thatha inqwelomoya esebenzayo njengesalathiso) | -- |
| Imowudi yokunyusa i-blade yokunyusa | Uhlengahlengiso lwedijithali kwisikrini sokuchukumisa | -- |
| Isantya sepleyiti yokubona | 5 - 40m/min (Ukuguqulwa rhoqo) | 5 - 40m/min (Ukuguqulwa rhoqo) |
| Ubukhulu bepleyiti yokubona | 2 - 20mm | 2 - 20mm |
| Ubukhulu bobubanzi beplate yeesarha | 1350mm | 600mm |
| Uluhlu lobude bepleyiti | 500 - 2400mm | 2400mm |
| Ubunzima obupheleleyo besixhobo | ≈5.5T | ≈3.5T |
Iimveliso ezinxulumeneyo
-
Oomatshini boHawk baThathu Rip Saw
Iiparamitha zobugcisa Amandla emoto: 3 * 4KW Injini yokutyisa: 1.5KW Isantya esiphezulu: 2980 (r/min) Ukucaciswa kweblade yeSaw: 300mmX3.2mmX2.2mmX40mm Isantya seSaw: 15 ~ 35 (m/min) Ubukhulu beSawing: 3-25mm Ubukhulu : 1160mm * 2960mm * 1140mm Ubunzima: 2.1(T) I-Hawk Machinery Three Rip Saw yenziwe ngumzimba ovalelwe ngokupheleleyo kunye neqonga lokutyisa nokukhupha....